KUPER FLI 1000
KUPER FLI 1000
Function
Veneers which are exposed to high temperatures during the further processing (e.g. wrapping or membranepress technology) are joined preferably with urea based glues.
To fulfil this task a special process of heat supply and simultaneous pressure over a longer transport section is necessary. When operating preglued veneers an even higher capacity is achieved. For small series or special applications the KUPER FLI 1000 is delivered with an integrated glueing aggregate as standard component
Advantages at a glance
- sturdy due to solid steel stand construction
- precise exact glue application and sensitive pressing system
- maintenancefree due to directly driven special
non heat conductive fibre chains - materialsaving no stains or shrinking of the veneer
- energysaving due to extremely narrow heating zone
Technical data KUPER FLI 1000
Technical data KUPER FLI 1000
| Throat depth | 1000 mm |
| Veneer thickness | approx. 0.3 – 2.5 mm with internal glue application* approx. 0.3 – 5.0 mm with external glue application* |
| Veneer strip length minimum | approx. 350 mm |
| Veneer strip width minimum | 45 mm |
| Feed speed | approx. 12 – 55 m/min. |
| Length of heating section | 1200 mm |
| Operating voltage | 400/230 V, 3 Ph + N + PE, 50/60 cycl. or special voltage |
| Total connected load | approx. 11,8 kVA |
| Compressed air consumption | 5 NL/min. 6 bar |
| Floor space | approx. 2270 x 1870 x 1530 mm |
| * Subject to materials test |